|
Product Name |
Product Code |
Description |
Picture |
| Chain Winder |
DS177 (Left hand keyed)
DS178 (Left hand non-keyed)
DS179 (Right hand keyed)
DS1780 (Right hand non-keyed)
|
- Low part count & simple design means less problems and minimal main lenience requirements.
- Left and right hand option.
- Lever positioned away from the key allowing clearance when key is left in cylinder.
- Larger knob providing extra grip.
- Smooth lever operation.
- Chain winder footprint conforms to the existing industry standard.
- Cycle tested to over 10,000 cycles.
- Stainless steel fixings as standard.
- Key lockable with ratcheting means the window can be wound in whilst in the locked position but cannot be wound out, providing safety and security in high rise applications.
- Snap cartridge system in lever knob allows the knob to be transported separate from the lever to prevent damage.
- Modern style-smooth curves and unobtrusive lines to suit modern window designs.
- Available with 304 stainless steel chain (for applications requiring non-corrosive product) or gold passivity zinc chain.
- Spring back mechanism helps keep chain straight during travel.
Finishes :
Available in the full range of Doric powder coat colours to match or contrast your extrusions
|
|
|
Sliding Door Lock |
DS30 |
Features :
- Latch and cylinder inside with optional key or non-key outside.
- Stainless steel tongue.
- Anti-lift lugs to prevent unlocking through or misalignment.
- Can be key locked from the outside when used in conjunction with DS7 exterior handle.
Material : Die-cast body, Stainless steel tongue.
Finished : Black PC is standard however other (power coat colours are available on request). Matching Keeper set : DS18 Standard, DS20N Boral extrusions
|
|
|
Sliding Door Latch |
DS25 |
Latch inside with optional key or non-key outside.
Stainless steel tongue.
Anti-lift lugs to prevent unlocking through lifting or misalignment.
Can be key locked from the outside when used in conjunction with DS7 exterior handle.
Suits industry standard 3 hole (82mm) preparation.
Material : Die-cast zinc body. Stainless steel tongue.
Black PC is standard however other (power coat colours are available on request)
Matching Keeper set: DS18 Standard, DS20N Boral extrusions. |
|
|
Sliding Security Door Lock |
DS204
|
Material : Zinc.
Finishes : PC.
Cylinder : Not included.
Fixings : Included.
Cylinder options : DS197-5 pin C4
DS198-6 disc
DS199-5 disc
DS189-5 pin C4
|
|
| Sliding Security Door Lock |
DS246
|
Material : Combination of Engineered plastics, Zinc and Stainless Steel.
Finishes : Blk mill.
Cylinder : Not included. See options below.
Fixing : Included.
Cylinder option : DS197-5 pin C4
DS198-6 disc
DS199-5 disc
DS186-5 pin C4 |
|
|
Sliding Security Door Latch |
DS247
|
Application : Self-latching sliding door handle set.Material : Engineered plastic handle, Stainless steel tongue.
Finishes : Blk mill.
Fixing : Included.
|
|
|
Automatic Rim Deadlatch |
DS1180
|
Application : Double cylinder deadlatch for swing door and gates. Standard features includes hold back on the latchbolt, auto-matic knob unlocking via outside cylinder. Quick change cartridge for rekeying.
Material : Zinc housing & zinc tongues as standard.
Finishes : PBP, SCP, Whi, Brn.
Fixing : Included.
Key : C4 pin cylinder or wafer cylinders. Can be keyed alike to other Doric locks. |
 |
|
Automatic Rim Deadlatch with Lever |
DS1188
|
Application : Double cylinder deadlatch for swing doors and gates. Standard features includes hold back on the latchbolt, automaticknob unlocking via outside cylinder. Quick change for rekeying.
Material : Zinc housing & Steel tongue.
Finishes : PBP, SCP Whi, Brn.
Fixings : Included.
Key : C4 pin keyway only.
|
 |
|
Aluminium Layback ‘D’ Handle |
DN41
|
Application : Suits aluminium & timber doors.
Material : 19mm aluminium & timber doors.
Finishes : CA, Bze, PC.
Fixings : Bolt through fixing included |
|
|
Aluminium Layback ‘D’ Handle with Plates |
DN42
|
Application : Suits aluminium doors for shopfronts.
Material : 19mm aluminium rod.
Finishes : CA, Bze, PC.
Fixings : 8g screws. Not included.
|
|
|
Double Hung Cam Presslock |
DS315
|
Material : Zinc
Finishes : PC.
Fixing : 8g screws. Not included.
How to order
DS315 / Finish / Cylinder option
Cylinder Options : Nominate 5 disc or 6 disc. |
|
|
Double Hung Cam Lock |
DS324
|
Material : Zinc
Finishes : PC
Fixings : 8g screws. Not included.
Cylinder Options : Nominate 5 disc or 6 disc |
|
Door
Accessories
